Water Cooled Condensers

Parkaire offers cleanable Shell & Tube Integrally Finned Water Cooled Condensers from 3TR to 200TR capacity. These Condensers are built in a wide variety of sizes from 6 inch to 24 inch in diameter. Length vary from 3 feet to 20 feet over the tube heads.The Condensers are designed for a pressure of 20 Kg per sq.cm gauge on shellside and 7 Kg per sq.cm gauge on water side.

They are tested upto 28 Kg per sq.cm gauge on the shell side & 10 Kg. per sq.cm gauge on water side. The Condensers are fabricated as per TEMA / ASME unfired pressure vessels codes & ASHRAE standards requirements. Condensers for sea water marine application or with steels shells are also offered & designed as per customer specific requirements.



Water Cooled Condenser
   
Air Cooled Condensers

 

Parkaire offers Fin & Tube Air Cooled Condensers from 1TR to 60TR capacity. These Condensers are designed for an optimum combination of high heat transfer performance & low operating cost. The staggered tube, corrugated plate fin provides a highly efficient air flow pattern through the condenser. Copper tubes are mechanically/ hydraulically expanded assures maximum fin-tube bonding for optimum heat transfer.

Air Cooled Condensers are tested at 28 Kg per sq. cm gauge with dry nitrogen. Fin & Tube type Condensers for sea water marine application or with steels shells are also offered & designed as per customer specific requirements.

Air Cooled Condenser