Parkaire
the leaders in design and manufacture of heat transfer equipments
offers Heat Exchangers. Our range includes Shell
& Tube type. Double Pipe type & Fin & Tube type.These
are available in a wide range to meet your specific heat transfer
problem. |
| |
|
| Shell
& Tube type |
|
Parkaire
Shell & Tube type Heat Exchanger are built in a wide variety
of sizes from 6 inch to 40 inch in diameter. Length vary from
3 feet to 40 feet over the tube heads. The Heat Exchangers
are designed for a pressure of 20 Kg per sq.cm gauge on shell
side and tube side. The Heat Exchangers are fabricated as
per TEMA / ASME unfired pressure vessels codes & ASHRAE
standards requirements. Heat Exchangers for sea water marine
application or with steels shells are also offered & designed
as per customer specific requirements. |
|
|
|
| Fin
& Tube type |
|
Parkaire
offers Fin & Tube type Heat Exchangers for high heat transfer
performance & low operating cost. The staggered tube,
corrugated plate fin provides a highly efficient air flow
pattern through the Heat Exchangers. Copper tubes are mechanically/
hydraulically expanded assures maximum fin-tube bonding for
optimum heat transfer. Heavy duty fans are provided for better
heat transfer & low noise level. These are available upto
5 metres in length & 4 metres in height & numbers
of row deep depends upon the application
Air Cooled Condensers are tested at 28 Kg per sq. cm gauge
with dry nitrogen. Fin & Tube type Heat Exchangers for
sea water marine application or with steels shells are also
offered & designed as per customer specific requirements.
|
|
| |
|
| Double
Pipe type |
|
| Parkaire
Double Pipe type Heat Exchangers are built as per customer’s
specific requirements |
|
|
